Trouble binding fs-th9x with d4r-2

fiestafrog

fiestafrog

Well-Known Member
Im sure this is a common problem and listed somewhere but I can't find anything. Sorry in advance if redundant. I have spent 2 days searching the internet and its time for some real help! I bought the flysky fs-th9x on ebay used but in mint condition. Im hoping nothing wrong with it. Both radio and receiver are fr sky so I don't know why its such an issue?

The Problem: the radio I believe is suppose to start beeping when in binding mode. I got it to do it once but never again. Ive watched all the vids and read all the posts and nothing about this? I hold the button on the back while turning on and it just turns on is all. It is bound with the receiver that came with it but I want to use the smaller flysky.

Im really hoping someone can help. Im new to this and have a couple bobbie versions of quads and I'm hooked! Build is almost done on my 250. Ordered ESC's from Hobbie King so the hong Kong delivery for the ESC's is over a month!
 
Quite the confusing post. What is this ' smaller flysky' of which you speak. The model number.
 
They're not both fr sky. The radio is flysky and the receiver is fr sky those are completely different brands. You're going to need to either buy a flysky receiver (which you can find on amazon or banggood) or buy a fr sky module. The latter will cost a bit more. Hope this helps!
 
It won't let me post a picture and I can't figure out how to do a link but here is the breakdown of what I have:
Radio is a th9x fly sky
Recur er is a fr-sky d4r-2
And module is a fr-sky djt telemetry
 
20130320114940224.jpg
Thanks axel
 
It looks like your module has a 4 pin connector is that correct? Because the flysky transmitter has a standard 5 or 6 (i cant remember which) pin Jr style module bay. And the pins are all in a line where on your module it looks like they're in a 2x2 square.
 
Oh okay sorry it looked like a 4 pin from the other pic lol....so is the module going in all way and you hear a click? Is it definitely seated correctly into the module bay?
 
I have a back light installed and that comes on but the screen is blank. Online searches direct me to think it may be like a battery reverse problem even though I didn't reverse the polarity
 
You must log in or register to reply here.
Back
Top