Thunder QQ calibration?

Anthony Whitaker

Anthony Whitaker

New Member
I have failed to get my Thunder QQ in the air. I feel confident (-ish) that it's connected to the Tx correctively (as evidenced by this video
).

It seems to want roll office whatever reason. After dozens of hours, I'm stumped. I'm hoping some expert can observe the video and help guide me down the appropriate path.

It's a thunder QQ.
 
Appears either your props are on wrong or your motors are spinning in the wrong direction. Gotta say though, trying to maiden an untested craft of that size takes bigger balls than I've got..........
 
What flight controller and what flight mode? Also I'd suggest against such test inside, bad stuff will eventually happen.


As for the problem the flight mode is important to know what the flight controller is trying to do, it might be a little out of level and be trying to compensate, but that is hard to test on the ground. If for example it were in air mode the I gain would be sky rocketing while it were on the ground causing it to violently go in one direction on the other at some point.

May just need to get off the ground a bit more. Don't know for sure however.
 
Back
Top