Trankilo0255
New Member
Can't get power on my VTX TBS Unify Pro via my FC ( Foxeer F722 V2). Wiring is according the attached scheme, with the exception that I have the Pro 32HV, not the nano. I have measured the V on the pin and it show 9V so there is power going to the VTX
When I connect USB to the VTX I do get the blue led immediately, indicating it is not broken.
Am I missing something?
When I connect USB to the VTX I do get the blue led immediately, indicating it is not broken.
Am I missing something?
