TBS/Emax Eco build

Dugdog47

Dugdog47

Well-Known Member
This one is coming along nicely, just got the motors soldered and everything is working well. Parts used so far:
TBS V3 5"frame
Emax Eco 2306 2450kv motors
Racerstar 30amp lite ESCs
Geprc PDB
DALRC F405 fc20191119_173745(1).jpg
 
Here she is with props after a test flight but no camera or VTX yet. This thing is gonna rip!!
20191119_195508(1).jpg
The DALRC F405 is a very good fc. Hovering in the kitchen I was able to take my thumb off the throttle and just let it hover about 3-4 inches off the ground. It just stays there without throttle input. Awesome!
 
Last edited:
Some very intricate soldering is required to get the old DALRC F405 board to work with individual escs. Soldering isn't my best skill but I think this will work:20191120_224122(1).jpg
 
Back
Top