syma x5sc wont fly backwards

L

lotusteve

Member
I have a problem with my x5sc, it will fly forward very fast but when I pull back on the stick its coming back to me very slowly, I have to have the trim all way back to stop it flying forward on its own. I have done the calibration but this makes no difference. its only a week old as well. should it fly faster forward than back ?.
 
I'm no expert but I think it's a 'headless' type which means all directions same speed.
you can always try removing and re-inserting the batteries, that might reset something.
make sure there's no debris/dirt in the little motor gimbal things.
good luck, keep us posted.
 
jake8131 said:
Try recalibrating the gyros.
Click to expand...

Agreed.

To calibrate: Insert properly charged battery into quad. Set quad on level surface and turn on quad. Turn on transmitter and bind to quad (left stick fully up and down). Pull BOTH sticks down and to the right at the same time. Quad lights should blink for a few seconds. Calibration is complete.
 
I found flying it in "HI" performance solved these type of issues. Any wind will also have a noticeable effect with this drone.
 
Back
Top