Skystars H7 HD FC and ELRS EP2 TCXO compatibility

Hi, I would like to know if these two components are compatible with each other:

Skystars H7 HD FC + KO60 60A 4in1 ESC Stack (https://www.hobbyrc.co.uk/skystars-h7-hd-fc-ko60-60a-4in1-esc-stack)
ELRS EP2 TCXO 2.4GHz Receiver (https://www.hobbyrc.co.uk/elrs-ep2-txco-24ghz-receiver)

And could you tell me why they are or they aren't, please?

Thank you in advance!
Should be fine the receiver just needs gnd and 5V and Rx/tx lines hooked up to one of the 8 uarts the flight controller supports. Configuring the elrs receiver (and transmitter) with password binding/pairing is a small pain the first time around but should be all good after that, but the fc and receiver should be all good basically just pick the right port in betaflight ports tab for the serial connection and choose crossfire for the receivers serial protocol (think in the configuration tab but might be renamed/moved in betaflight, been a while since I set one up). Oscar liangs site is good for details on hooking up elrs
 
Back
Top