SJRC Z5 question(s)

Sumantri Oscar said:
Thanks for your replied, and now back normal. But i have some issue now, my Z5 can't fly with stable after take off. The Z5 flying zigzag and difficult to control, Anybody can help me to settle this issue?? Or explain to me how to trim the Z5?
Click to expand...

Your Z5 had a crash.
Apparently camera is not the only one that was damaged. I fear that the flight problem is due to the propellers not in sync.
Possibilities :
1. Check to see if the props are screwed securely.
2. The props mechanism is damaged and therefore they do not rotate correctly and are not in sync.

Sorry, that's the best I can do to assist you.
 
Thanks for your assist.
I've check the props and change with the new one, but the problem can't solve. Next the prop mechanism i will check again. Thanks mate for your help.
 
Sumantri Oscar said:
Thanks for your replied, and now back normal. But i have some issue now, my Z5 can't fly with stable after take off. The Z5 flying zigzag and difficult to control, Anybody can help me to settle this issue?? Or explain to me how to trim the Z5?
Click to expand...
Said to recalibrate joysticks point at one and seven I think it says to factory reset calibration
 
davidhk129 said:
Your Z5 had a crash.
Apparently camera is not the only one that was damaged. I fear that the flight problem is due to the propellers not in sync.
Possibilities :
1. Check to see if the props are screwed securely.
2. The props mechanism is damaged and therefore they do not rotate correctly and are not in sync.

Sorry, that's the best I can do to assist you.
Click to expand...
If u ever selling camera module for parts let me know
 
Hello.
App shows text warning "Remote low voltage" and empty red battery icon, but works well. When I connect remote to charger - charging starts and ends in a few minutes, charge LED changes from red to green. Is there any way to recalibrate remote's battery to avoid this fake warning?
 
inode said:
Hello.
App shows text warning "Remote low voltage" and empty red battery icon, but works well. When I connect remote to charger - charging starts and ends in a few minutes, charge LED changes from red to green. Is there any way to recalibrate remote's battery to avoid this fake warning?
Click to expand...
problem solved. I moved the joysticks to the 7 - 5 positions, remote produced single beep, the camera has moved up-down and remote battery icon become normal. I powered off both drone and remote, turned them both on again, and now i'm able to connect remote and drone by left jostick up and down and everything is performing well.
 
Back
Top