claudio-rj
New Member
Hello everyone !
My SG 906 Pro 2 fell into my pool by accident... ;-(
After that, the rear left arm just got melted down after i turned it back on next day ( short circuit or whatever) ...
I have changed the bad arm/motor, all the motors are spinning ok but the gimbal is still bad...the camera works but not the gimbal ( it keeps facing down and won't respond to the command in the controller ).
I can start and fly the drone, but it drifts to the left...i have made the compass and the gimbal calibration ( even with the gimbal not working ).
I'm repairing it step by step to make sure it will fly stable and then change the gimbal assembly, which is too expensive.
Anyone knows if the gimbal is used to stabilize the drone during flight ? is that my problem now ? i mean, if i change the gimbal will the drone fly ok again ?
Just to mention the drone was flying normally before the accident...
My SG 906 Pro 2 fell into my pool by accident... ;-(
After that, the rear left arm just got melted down after i turned it back on next day ( short circuit or whatever) ...
I have changed the bad arm/motor, all the motors are spinning ok but the gimbal is still bad...the camera works but not the gimbal ( it keeps facing down and won't respond to the command in the controller ).
I can start and fly the drone, but it drifts to the left...i have made the compass and the gimbal calibration ( even with the gimbal not working ).
I'm repairing it step by step to make sure it will fly stable and then change the gimbal assembly, which is too expensive.
Anyone knows if the gimbal is used to stabilize the drone during flight ? is that my problem now ? i mean, if i change the gimbal will the drone fly ok again ?
Just to mention the drone was flying normally before the accident...