Reusing a transmitter/reciever

F

FcStory

Member
I built an inspire clone.

-Quantum 475 kv motors
- 30a ESC's
-5s Turnigy 3000 mah battery
-Acro Naze flight controller
-CC3D power distro.

My question is.. I've bought a transmitter and reciever off of ebay and the guy just messaged me and told me its like 2 weeks out.. Can I take the trans and reciever from an UDI818a I have laying around to do a test flight? Range is only about 200 ft.. But I can at least get it off the ground. Thanks.
 
FcStory said:
I built an inspire clone.

-Quantum 475 kv motors
- 30a ESC's
-5s Turnigy 3000 mah battery
-Acro Naze flight controller
-CC3D power distro.

My question is.. I've bought a transmitter and reciever off of ebay and the guy just messaged me and told me its like 2 weeks out.. Can I take the trans and reciever from an UDI818a I have laying around to do a test flight? Range is only about 200 ft.. But I can at least get it off the ground. Thanks.
Click to expand...
Technically yes, with the right tools like an arduino you could do this. However I'd strongly suggest against it.
 
You must log in or register to reply here.
Back
Top