quad comes towards me when hovering

N

nick_quad_86

New Member
I have a flamewheel f450 with a naza. It appears to be balanced but when ever it's hovering it moves backwards in relation to the front of the quad. I have adjusted the trim and sub trim in the spektrum dx6i but it still moves. Any ideas? Maybe a gain level or something ? Using the dji naza assistant. Thanks in advance.
 
All of them move a little bit, and others more than some. Does it stop or just keep coming?

Have you calibrated the radio in the assistant software?

Look and see what the values show in the assistant software. The values will fluctuate a little, but not stay to one extreme.

If this is still going on ill check mine out when I get home to see how much they fluctuate. I don't have time to do it this morning.
 
ringolong said:
All of them move a little bit, and others more than some. Does it stop or just keep coming?

Have you calibrated the radio in the assistant software?

Look and see what the values show in the assistant software. The values will fluctuate a little, but not stay to one extreme.

If this is still going on ill check mine out when I get home to see how much they fluctuate. I don't have time to do it this morning.
Click to expand...
Thanks I will check it out tonight when I get home. And yes it will just keep moving unless I correct it
 
mess with the adjustments how for the gps is from the center of flight controller. also make sure weight is even front to back, and naza m lite gps hold isn't the greatest. lots of factors mainly if the weight is distributed evenly and number of satellite's. I just upgraded firmware from naza m lite to the naza v2 on my f450, much better stabilization. also I have considered sticking the gps module directly on top of the flight controller with double sided tape, and making all the measurments "0" for GPS location... any thoughts.


check it out.
naza-upgrade.com/
 
Back
Top