PLEASE HELP - Running into a bit of trouble testing motors

X

X1XnobleX1X

Member
Running into a bit of trouble, and I'm worried!
Connected the motors to ESC and connected it to the power distribution board.
And plugged the signal wire into the Naze32.

Tested the Naze32 - No smoke. - Plugged in the battery no smoke.

Tried testing my motors, via the motor test in Cleanflight, none of the motors spun.

Since, I was following a guide, I plugged in the D4R-II as they had plugged it in first, not sure if the D4R-II is powered, no LED turn on, when holding the F/S button. - Still plugged into computer.

Am I missing something?

PLEASE HELP!

EDIT: Manged to bind the D4R-II to my Taranis, though Roll, pitch, Yaw, Throttle works, but the AUX channels don't move at all for any switch.

Any ideas?




 
Did you calibrate the escs yet? Seems like that has to be completed first from what I remember.

The Taranis will need to be programmed to send signal to the aux channels if you have not done so.
 
ringolong said:
Did you calibrate the escs yet? Seems like that has to be completed first from what I remember.

Thank you for your advice, calibrated all ESCs and all of them worked, which is great!





EDIT: I can get it to arm. But the motors are not spinning at all? HELP!
Click to expand...
 
Last edited:
You must log in or register to reply here.
Back
Top