Part selection

DJI (through resellers) sells an F450 kit with all of the parts you need for the build. If I were in your shoes, I would just follow
the specs from the kit since you can't go wrong:

http://www.dji.com/product/flame-wheel-arf/spec

F450
Model
Flame Wheel 450 (F450)
Frame Weight
282g
Diagonal Wheelbase
450mm
Takeoff Weight
800g ~ 1600g
Recommended Propeller
10 × 3.8in ; 8 × 4.5in
Recommended Battery
3S~4S LiPo
Recommended Motor
22 × 15mm or 22 × 12mm
Recommended ESC
30A OPTO
Click to expand...

They have more detailed specs on the last page of this PDF:

http://download.dji-innovations.com/downloads/flamewheel/en/F450_User_Manual_v2.1_en.pdf

You can decide on the props, but as a rule of thumb, 8 inches will be a little more agile and 10 inches will be a little more stable.

You don't have to buy DJI parts. If you're willing to wait a week or two for shipping, HobbyKing & RC Timer have good prices on parts. Hobbyking parts have a lot of ratings, so you should be able to gauge quality that way. Hobbyking even has warehouses in multiple regions, so you can select the warehouse you want to shop from prior to selecting your parts to see the availability of what will ship from nearby. Or you can always use Ebay.
 
It's a good idea to select that close warehouse on Hobbyking, because shipping out of Hong Kong is RUDE! I shopped the other day and figured I'd go ahead and buy a frame. The shipping was going to be half the cost of the frame I was looking at! I like their folding Alien 560 frame, but I'll get it locally or go with something else.
 
Hugh Hemington said:
It's a good idea to select that close warehouse on Hobbyking, because shipping out of Hong Kong is RUDE! I shopped the other day and figured I'd go ahead and buy a frame. The shipping was going to be half the cost of the frame I was looking at! I like their folding Alien 560 frame, but I'll get it locally or go with something else.
Click to expand...

Agreed! Unless I absolutely need something that's only in the Hong Kong warehouse, or I'm ordering all very small stuff (connectors and whatnot), I will always do what I can to choose products that are available in the USA warehouse. The price difference between the HK and local warehouses is usually very small, but shipping is much quicker and much better locally. RC Timer is different though. They offer free shipping on a lot of products from Hong Kong and it's usually pretty fast. They also just opened a US distributor, but the prices are way higher than their main store.
 
You must log in or register to reply here.
Back
Top