Part list opinions and recommendations

E

Erik

Member
Hey!



I´m building my first quadcopter and want your opinion on some parts that I´m planning to buy. I would like to now they are compatible with eachother and if you think that they are the best buy.

Thank you



450 frame with interated pcb (already buoght)

http://i00.i.aliimg.com/wsphoto/v1/...rame-Blue-White-High-Landing-Gear-for-DJI.jpg (as shown on this image)



MultiWii PRO fligth controller

http://www.hobbyking.com/hobbyking/...i_PRO_Flight_Controller_w_MTK_GPS_Module.html



2-axis gimball controller

http://www.hobbyking.com/hobbyking/...Gimbal_Stabilization_Control_Board_w_IMU.html



FrSky Taranis 9XD Plus

http://www.hobbyking.com/hobbyking/...o_Digital_Telemetry_Radio_System_Mode_2_.html



Gimball for GoPro (already bought)

http://www.hobbyking.com/hobbyking/...h_2208_Motors_and_3K_Carbon_Construction.html





20Amp afro ESC (already bought)

http://www.hobbyking.com/hobbyking/..._Motor_Speed_Controller_SimonK_Firmware_.html



Multistar Motor and props (already bought)

http://www.hobbyking.com/hobbyking/..._Motor_and_Propeller_Combo_10_4_5_CW_CCW.html



Zippy 3cell 4000mAh battery (already bought)

http://www.hobbyking.com/hobbyking/store/__9957__ZIPPY_Flightmax_4000mAh_3S1P_40C.html



Turnigy 12v 2-3 cell charger (already bought)

http://www.hobbyking.com/hobbyking/store/__7637__Turnigy_12v_2_3S_Basic_Balance_Charger.html
 
Hi mate it hard to help when you already have most ok you dont need gimbal control as the FCB will do this for you any way output pin 13/14
Multistar motors work better with a ESC with BL heli flash , but may be ok with the simonk if the motors throttle keep pitching your have to change the ESC to BL heli flash
The rest should be spot on
 
Looks great, you really did some research before posting. :) Were you in to hobby stuff before you got into muti-copters?
 
You must log in or register to reply here.
Back
Top