New DM007 Problem

A

Anais Anais

New Member
I just bought this online from Gearbest.com and It can't take off. I already reset the gyro by pressing the lower left yam and throttle as i read in this forum. I don't know whether this is a prop problem, motor problem or battery problem. I am really disappointed with Gearbest since they kill my excitement in flying the first quadcopter. I provide the link to two videos to help me explaining the issue. I would really appreciate if any of you could help me with this problem. Thank you :)

https://www.dropbox.com/sh/ha56mc1wmjv4r7s/AACKFccVEB9pL7T3ZA7CExwUa?dl=0
 
THe first 1:14 of the the 2nd file are corrupt. From what I see it looks like your tx is not bound to the copter. There may be a saftey that you have to do such as taking the stick from 0% to 100% and back to 0%
 
The vids were bad.

Try pointing it away from yourself and move farther away, then try to bind.
 
Last edited:
GJH105775 said:
THe first 1:14 of the the 2nd file are corrupt. From what I see it looks like your tx is not bound to the copter. There may be a saftey that you have to do such as taking the stick from 0% to 100% and back to 0%
Click to expand...

I see, I'll try to post another picture tonight then. How to do the safety using the tx?
 
Anais Anais said:
I'll try to post a better quality video tonight :D
how to bind?
Click to expand...

Turn on the transmitter, then turn on the quadcopter (or plug in the battery).

To bind, make sure the throttle joystick is all the way down. Then move it all the way up, then all the way down again. Tap it back up just a little to see if it tries to fly. If not go all the way up a 2nd time.

Make sure you read through the manual well even though I am sure if is difficult to follow as most are.
 
Back
Top