new build... need help for parts

[hug_dealer :D]

Hi all... i am going to start a new build and i need help.

I am hoping to have inav as the firmware, using an s500 frame. I would like to have the following functions:
Gps missions (inav does that of course)
A video camera + adjustable gimball(for video/photos)
Fpv functionality potentially.
A video feed on top of a radio that shows my speed and battery and signal stats. As well as altitude/distance from arming? (need radio too!)
My radio needs to move the video camera too.
My budget is £600. If you have links can they possibly be for uk stores?

Thanks in advance,
From the hug dealer xoxo <3

 

[RENOV8R]

I'd recommend not using iNav as the flight controller you need (Omnibus F4 type) is really not suited for larger AP type craft. Here's what I'd use if you want to keep anywhere near your planned budget:

Tarot ZYX-M flight controller and OSD unit. This will give you the stable flight you need for photography and a multitude of flight information.
https://www.hobby-wing.com/tarot-zyx-multicopter-flight-controller-zyx25.html
https://www.hobby-wing.com/tarot-tl300c-osd.html

 

[hug_dealer :D]

Can i have a full spec list please? Like the escs you wo7ld use and moyors and props. I would like it to be able to go fast at times too! And possibly the flight time if you choose a battery. Is there any software like inav i could use? Specifically for gps missions and return to home. As well as self leveling?

 

[RENOV8R]

I would need to know the specific frame you are intending to use

 

[hug_dealer :D]

Link below. Chose primarily for the looks. I love this frame. Can you design a parts list with the specifications i mentioned above? Thanks ☺

 

[hug_dealer :D]

https://www.unmannedtechshop.co.uk/s500-quadcopter-frame/

 

[hug_dealer :D]

I need the gps missiojs and stuff to be viewed from a mobile device. And the screen for camera feed i need to put on the radio.

 

[RENOV8R]

You can't have the video feed transferred to your mobile device as it would need to be done through a wifi signal and range is extremely limited. You will need specific transmitter which will transfer your video to fpv goggles or a monitor. What kind of range are you expecting to get?

 

[hug_dealer :D]

Anythimg over 1km is good

 

[hug_dealer :D]

And can i have it output to a mknitor plz

 

[RENOV8R]

Anythimg over 1km is good

Anything over 1km gets very expensive

 

[hug_dealer :D]

Anything over 1km gets very expensive

Just less than 1km then?? Like 800m? I just need the parts list from someone cos i dont have time to figure one out. Can i have tje parts list asap plz

 

[RENOV8R]

Soooo let me get this straight. You want me to make you a list because YOU DON'T HAVE THE TIME TO DO IT YOURSELF??? Yeah, that ain't gonna happen