n00b trying to figure out Component Compatability

[aero_fpv]

Hi. I am new to the forum and new to building quads. I have a P3P and have become proficient. I am ready to hone my skills... both on the building and on the flying.
My little brother bought a bunch of components and failed... then did the same thing all over again... and failed again. I enjoy the tech side of things, so I offered to try my hand at it since it is all on his dime!
Here is what we have so far.
I believe I need a new Flight Controller, and a new receiver that are compatible with all of the other parts here. Can anyone provide some insight to the compatibility of this list?
I am open to any input that is given!
Thanks in advance

 

[holtneil]

Hi mate a 2200 mah may be to big for frame look at 1800 mah
I think the newer nase32 can work on Spektrum sat receiver just read the spec so you may not need the full receiver
What props ? 6x3 should be OK

 

[Jackson]

You could also try some 5045 bullnose props.

You are showing a Spektrum RX and a Turnigy TX (remote?). Do you already have these pieces?

 

[aero_fpv]

You could also try some 5045 bullnose props.

You are showing a Spektrum RX and a Turnigy TX (remote?). Do you already have these pieces?

Yes. I already have those pieces. I'd like to stick with the remote, but am willing to buy another receiver. Do you have any suggestions?

 

[aero_fpv]

Hi mate a 2200 mah may be to big for frame look at 1800 mah
I think the newer nase32 can work on Spektrum sat receiver just read the spec so you may not need the full receiver
What props ? 6x3 should be OK

Ok... so you think that everything should work ok with a newer board? or should i get a new board and receiver? If so, what do you recommend based on the item list that I've got?

 

[holtneil]

This will work on Spektrum or frisky sat receivers
http://www.google.co.uk/aclk?sa=l&a...ahUKEwipl6GkzPnRAhVCgpAKHU8PBDoQwg8IIA&adurl=

 

[aero_fpv]

This will work on Spektrum or frisky sat receivers
http://www.google.co.uk/aclk?sa=l&a...ahUKEwipl6GkzPnRAhVCgpAKHU8PBDoQwg8IIA&adurl=

Thanks for the input! Will this board bind with the remote I have listed?

 

[Jackson]

but am willing to buy another receiver. Do you have any suggestions?

This should be the 'stock' one, but you didn't list a model number of your TX.
http://www.ebay.com/itm/New-Turnigy...600704?hash=item20e4718e40:g:M1MAAOxy4t1Sd~BR

I also suggest you get an F3 flight controller.
http://www.ebay.com/itm/SP-Racing-F...030101?hash=item2ef098a0d5:g:yfwAAOSwmtJXYkct

This is the deluxe one but there is really no use for GPS etc. on a race quad.
http://www.ebay.com/itm/SP-Pro-Raci...567313?hash=item2ee8765f11:g:rjQAAOSwEgVWStVn

And you can look here on how to hook things up, in your case it's PWM.