My first build! are these components suitable for a mix between freestyle and long range?

B

britdan

Member
So this is what 3 days of solid research has bought me too. Im going for a long range/freestyle type quad. I understand this list will be missing a few bits as Im still a newb and the receiver and transmitter side of things, confuses me!
So here, go's, please can people recommend any replacements I should make and also add parts Ive missed.

Frame - Supafly Flipmode 6"
Motors - T-Motor F40 1600KV
Props - 6x3x3
Controller - FrSky Q X7
FC and ESC - Supafly's Aikon flight stack
VTX - VTX Immersion Transmitter
Receiver - TBS Crossfire NANO
Antenna - Foxeer lollipoo v3
Camera - Foxerr pred mini v4
Battery - Any 6S 4000Mha
Goggles - Fatshark Pred v2

Help appreciated!
 
Looks like a decent list, just a couple things I'd change up. When you say the Immersion VTX, I'm assuming you mean the Tramp. I'd change that to a TBS Unify Pro, smaller size and higher output.

As for the battery well that's about twice as big as is is even practical. In LR, there's a fine line where the weight of the battery causes shorter flight times. The largest my 7" Falcon MR can take is 2200 mah, any larger then the flight times start to decrease. The sweet spot on a 6" rig is usually around 1800-2000mah.

As for the TBS Nano , that's about as good as it gets as far as a 915MHz receiver goes but you will need the Crossfire module to go on your QX7 transmitter
 
www.unmannedtechshop.co.uk

TBS Unify Pro32 Nano 5G8 VTX

With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it's the most comprehensive, future proof, highest quality and...
www.unmannedtechshop.co.uk www.unmannedtechshop.co.uk


Is this the right unify pro as a VTX? ^^^^^



www.unmannedtechshop.co.uk

Tattu R-Line 3.0 2000mAh 14.8V 120C 4S1P Lipo Battery Pack

Tattu R-Line Version 3.0 2000mAh 14.8V 120C 4S1P LiPo battery pack is the updated version of R-Line series in 2019. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V3 definitely dominate all your races. What is R-Line? R-Line is a brand new product line specifically...
www.unmannedtechshop.co.uk www.unmannedtechshop.co.uk
Is this battery suitable? would it fit on a 6' supply flip mode? ^^^

Thank you!
Danny,
 
Last edited:
That lipo would probably fit but may be a tight fit for the HD camera depending on your setup, best thing to do would be to contact SupaflyFPV directly for support. As for the Nano VTX, I wouldn't recommend it for any long range as it's max output is only 400mW and it only has a 3-13v input so you'd need a regulator to supply power. I'd suggest the normal Unify Pro which is 800mW and can be powered by full vbat
https://www.team-blacksheep.com/products/prod:unify_pro_hv_sma
 
Back
Top