motors

[joseph]

i have one motor that will spin up just for a second or two after the power is off. thanks any info would be great.

 

[holtneil]

HI can you give us more info , FCB, ESC, Motors , transmitter etc

 

[joseph]

Sorry, kk2 hk 20a dx61.

 

[GJH105775]

Sounds like a setting in the firmware, or maybe a something with the board passing the raw signal through to the motors while powering down. can you give the link to the exact ESC?

 

[joseph]

Pardon my stupidity but i am not sure what that is. the link.

 

[GJH105775]

Uh, where did you get the ESC from. Or what is the manufacture of the ESC and the model of the ESC.

 

[joseph]

Oh sorry hobby king 20 amp ubec.

 

[GJH105775]

Ok here are your programming options:



Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)

I don't see anything that pops out though.

 

[joseph]

ok thanks it may be a bad esc. thanks

 

[GJH105775]

Could be bad, may try contacting HK to see if they'll send you a new one, or if they have had this problem before. (providing you got them form hobbyking.com)

 

[holtneil]

Hi sorry i was not about was at work , look at the transmitter lower the throttle curve to give you a neg number , I had this on my 500 heli every now and them the rotor will turn so now throttle is -5 this will stop it , some ESC can play up