motor not working after i replaced esc

E

edrum22

New Member
This is my first quad and i had it working perfectly, but after crashing it a few times one of the esc's failed and caught fire. I replaced it with the same esc and recalibrated the esc's, but the motor attached to the esc just fidgets back and forth. I checked all the connections and they are fine.

esc: http://www.amazon.com/Andoer-Brushl...&redirect=true&ref_=oh_aui_detailpage_o03_s00

motors: http://www.amazon.com/Hobbypower-Em...&redirect=true&ref_=oh_aui_detailpage_o01_s01

battery: http://www.amazon.com/Venom-4000mAh...&redirect=true&ref_=oh_aui_detailpage_o00_s00

props are 10 x 4.5
 
edrum22 said:
This is my first quad and i had it working perfectly, but after crashing it a few times one of the esc's failed and caught fire. I replaced it with the same esc and recalibrated the esc's, but the motor attached to the esc just fidgets back and forth. I checked all the connections and they are fine.

esc: http://www.amazon.com/Andoer-Brushl...&redirect=true&ref_=oh_aui_detailpage_o03_s00

motors: http://www.amazon.com/Hobbypower-Em...&redirect=true&ref_=oh_aui_detailpage_o01_s01

battery: http://www.amazon.com/Venom-4000mAh...&redirect=true&ref_=oh_aui_detailpage_o00_s00

props are 10 x 4.5
Click to expand...
Sounds like that motor was damaged when the ESC failed, may have broken one coil.
 
How long after you bought your first esc's did you buy your second? It probably is the motor, but that one esc may have a different version of the firmware than your others. Even then I'm not sure if that would cause what you're describing though
 
Back
Top