motor input

[gunslinger007]

Hi getting my parts list together.

frame q450

motors
MultiStar 350 to 450 Frame Size 2212 Combo Set With Self-Tightening Propellers CW/CCW Set Of 2
http://www.hobbyking.com/hobbyking/...lf_Tightening_Propellers_CW_CCW_Set_Of_2.html

or

MT2213-935KV MultiStar Motor and Propeller Combo 10-4.5 CW CCW
http://www.hobbyking.com/hobbyking/..._Motor_and_Propeller_Combo_10_4_5_CW_CCW.html

esc
Afro ESC 20Amp Multi-rotor Motor Speed Controller (SimonK Firmware)
http://www.hobbyking.com/hobbyking/..._Motor_Speed_Controller_SimonK_Firmware_.html

How will this work together will it be pretty fast and still be able to lift a camera?

 

[holtneil]

Hi mate to do camera work I take it you mean filming while wizzing around the 935kv with 10x4.5 props would be better , As for ESCs simonk flashed is good but I have received good reports on escs flashed with BL HELI work better on multistar motors , the bec side of the esc is low so make sure the receiver and FCB wont make it brown out, you can always run a BEC to power the FCB and receiver

 

[gunslinger007]

Is their a better motor prop combo? I am just looking for easy parts to use for a noob. Who makes esc flashed with blheli?

 

[holtneil]

Hi mate RCTIMER are really bullet proof they take so much and keep going but if you go rc timer then simonk will be good
http://rctimer.com/product-1150.html
http://rotorgeeks.com/index.php?route=product/product&path=34_43&product_id=159

 

[gunslinger007]

Nice thanks for help, those motors look great think I will go with them.

How would these props be with them?
http://rctimer.com/product-1094.html

 

[holtneil]

Hi mate , yes will be good also the carbon ones this will give you a more stable flight but cost a little more but worth it
http://rctimer.com/product-1106.html

 

[gunslinger007]

How can i hook up gps to the OpenPilot CC3D Flight Controller, and what would be a good model to use?

 

[holtneil]

sorry never used it they do have a how to do on there site it would be worth a look