You could use just 2 bolts, I do.Okay I'm guessing the 16x16 motor mounting is not compatible with my racerstar 2400kv motors?
Actually I was thinking about slotting the bolt holes longer on a mill. I'm a believer in the 4 bolts per motor theory.You could use just 2 bolts, I do.
Dude those screws couldn't weigh more than a gram or two each, so for extra screws=8-16 grams max (just guessing)I've always just used 2. Every grams counts
Unless you're racing I don't see the problem?![]()
Then again, there ARE some freestyle fliers that feel being too light lacks robs you of the momentum needed to pulloff some tricks,
The attempts didn't turn out well as I was able to get inverted, and slam into the ground lol.
Yea I'll get it eventually but for now I just fly my 5"ers in angle mode. I'm still a novice.Been there, done that ... lol ... (helps if you remember to chop the throttle as soon as you're inverted)![]()
Check out about the 50 second mark I think I came fairly close to nailing that trick lol:There's one that comes to mind that illustrates that:
Flying fast straight ahead you do a half backflip and hang there while you're inverted so you're looking
behind you until momentum runs out and you hafta complete the flip
It's really a pretty cool move if you can pull it off. There's a Youtube vid of the guy who came up with it explaining how to do it with Joshua Bardwell.