kk2 flashing issues

Did you verify that the kk is connected to the flash tool properly and that you selected the right com port?
 
GJH105775 said:
Did you verify that the kk is connected to the flash tool properly and that you selected the right com port?
Click to expand...
I plugged it in correctly because the lights and display screen came up. I plugged it into the blus usb outlet located on the right hand side of my laptop. I set all setting as instructed on the Hobby King site, installed all necessary drivers and all. Could it be the dongle or maybe i need to take off the signature setting in device driver. IDK@
 
derrick mitchell said:
I plugged it in correctly because the lights and display screen came up. I plugged it into the blus usb outlet located on the right hand side of my laptop. I set all setting as instructed on the Hobby King site, installed all necessary drivers and all. Could it be the dongle or maybe i need to take off the signature setting in device driver. IDK@
Click to expand...
The com port on your pc will be different than on whoever demonstrated it for hk. If you have tried each one then open device manager and try to locate it, then verify that it is enabled and working properly.
 
Hi mate another thing is dont install the usb drivers just leave them on your desktop in a file and when you plug in the usb the first time it should look for drivers and install its self
 
You must log in or register to reply here.
Back
Top