kk2.1 Aileron

[Earp]

Receiver test shows aileron left -6 and +122 right.
How do I correct this?

 

[holtneil]

Hi mate look in the transmitter at servo travel you can adjust the range on cyclic channels the monitor should read 100% in all directions , make sure that channels are reading zero with stick in the centre use sub trim to get them to zero before you adjust travel range

 

[Earp]

Endpoint was set at 5%.. Changed to 100% which fix it. Thanks for the reply!

 

[holtneil]

Ok glad it's working good luck with the rest of set up we are here if you need help

 

[Earp]

Thanks!!