Holy stone factory reset ??

There is no such thing as "factory settings", I'm afraid.
Why don't you tell us what issues you are having with your HS700E?
 
I don't own a hs700e, so I cannot tell you the exact step by step.
However, in your user manual, there should be a page on "pre-flight" steps, such as pairing with the controller, GPS setup etc.
One of the steps should be Gyro Calibration. Make sure you include that step in your pre-flight setup procedures.
You do have the user manual, do you?
 
Last edited:
I took a look at the HS700E user manual.
It does NOT have gyro calibration.
So, my suggestion is no good for you.
My apology.
 
davidhk129 said:
I took a look at the HS700E user manual.
It does NOT have gyro calibration.
So, my suggestion is no good for you.
My apology.
Click to expand...
Thanks for the input.
I know what you mean about the gyro calibration.
My other drone is a ruko f11 pro.
Gyro is one of the steps before takeoff.
 
Strangely I looked up HS700 user manual, and it has gyro calibration included.
Just for the hell of it, give it a try on your hs700e.

hs700 gyro calibration.jpg
 
Ok......test flight was much better.
The gyro calibration helped tremendously.
Thanks for all your help.
Maybe this thread will benefit someone in the future.
Again thank you for all your input.
Best regards birdsrule1968.
 
Also... the shade tree that I was using kept my satellite count at 10.
So I repositioned my chair and the reception went up to 14 to 16.
This too was an improvement.
Best regards BR68.
 
You must log in or register to reply here.
Back
Top