Hero RC XQ6 HD Drone motor replacement

[regor60]

Can someone tell me how to replace the motors on a Hero RC XQ6 HD Drone. When I search on google it just shows me info on a Syma XC5 motor replacement and they are different. Thanks!

 

[Jackson]

Yours looks like a SYMA X5SC. They use 8mm instead of the X5C's 7mm motor.
http://www.amazon.com/Blomiky-Motor...d=1443556025&sr=8-2&keywords=syma+x5sw+motors

Multiple listings here for each.
http://www.banggood.com/search/syma-x5-motor.html

 

[regor60]

the Syma X5C motor has a cradle that the motor is attached to and is held into the drone lower body by a screw, but the Hero RC XQ6 has the motors that look to be pressed into the actual bottom of the drone body. I tried removing the motors by pulling on them but they don't come out of the housing. I don't want to put too much pressure on them and break the actual lower drone bottom.

 

[Jackson]

the Syma X5C

You'll note I said it looks like an X5SC.

I tried removing the motors by pulling on them

You need to push them out by applying pressure to the pinion side.

Good Luck.

 

[regor60]

thanks for the help!