Help with JJRC H6C Quadcopter

J

jclarkphoto

New Member
I just recently bought this little drone for my son but I am unable to get the thing to fly. The remote seems to not communicate with the drone. The lights are on the remote and the quadcopter but I can not get it to take off. Please advise
  • The signal is good on the remote
  • The battery is completely charged
  • I purchased brand new from Amazon

image2-S.jpg
image3-S.jpg

image1-S.jpg
 
Turn on quad first...should see flashing lights.

Turn on transmitter next....lights on quad should then go to a slow flash..(make sure throttle on transmitter is all the way down first and that all the trims are centered.)

Now move throttle stick all the way up then all the way back down and you should hear a beep...it should work then...If not i would suggest sending it back for replacement or refund.

You can find the binding procedure on youtube...I just mentioned the most common for binding most of the different models out there....I hope it works for you.
 
Last edited:
Back
Top