Help! What BNF drone to buy for X-Lite Pro

M

m00jitsu

New Member
New to the hobby.

Bought an X-Lite Pro which i love - and have been using to practice on simulators.

Bought a tinyhawk S from banggood - but have not managed to successfully bind it to the controller. After multiple attempts to change the drone's receiver (from D8 to D16) and change the firmware of the controller, i've decided it would be a lot easier to simply get a new drone.

So my question is thus. Can anyone recommend a ACCESS compatible BNF drone i can pick up that will work with an X-Lite Pro?
 
Thanks for the rec Dugdog!

It says it's FrSky compatible - but doesn't explicitly say ACCESS or ACCST D16? Banggood also said the TinyHawk S was FrSky compatible - but does not work with the latest X-Lite Pro firmware.....

How do i know i'm not buying another drone that won't bind?
 
I have no idea how i'd attach that to the drone o_O is there a simple guide?

I keep stumbling across people saying they managed to get ACCST D16 to connect tto a tinyhawk S - but haven't been able to figure it out.

The other option looks like some sort of module that attaches to the back of the controller and enables you to use D8? Any idea what module that is?
 
www.banggood.com

IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite

Only US$31.99. Get the iRangeX IRX4 Lite CC2500 NRF24L01+ A7105 CYRF6936 4-IN-1 Multiprotocol TX Module for Frsky X-lite at Banggood. It offers versatility and compatibility for your Frsky X-lite transmitter.
www.banggood.com www.banggood.com
Also check the questions on the tinyhawk 2 page on banggood. Answers regarding radio firmware needing to be V1, and CLI commands to get it to work as is.
Note this is all Google-Fu as I use Flysky.
 
Basically all receivers take power (generally two wires for this red and black usually for 5V and 0V or GND reference), and they just have one signal line for connecting to the flight controller. Believe all the tiny hawk models use an all in one FC/ESC combo board and just the vtx is separate so you'd need to see if that FC combo board has a receiver input pad on it, also more weight to attach extra receiver so it is ideal if can get yours to bind somehow by swapping transceiver module in Bay of controller if available or otherwise.
 
Back
Top