Help setting up MicroMWC

Evaken

Evaken

New Member
Hi all,

I've recently started building a micro quad using parts from Hobbyking.
I did some initial research and chose parts initially by basing them off the pixxxy drone on Thingiverse, and then through a discussino with a bloke from Hobbyking.

I've followed Benedikt Haak's setup tutorial video, but can't seem to get the thing working.

I'm using a MicroMWC control board from hobbyking, it is a DSM2 board, has built in ESC's etc.
I've uploaded microwii 2.3, and am using microwii conf to view real time data and upload settings/firmware but the real time data doesnt seem to make sense, and I'm struggling to get it working. Initially I suspected the polarity on two of my motors was backwards, but there are definitely other problems too.

I am controlling it with a TGY9X with an OrangeRX DSM2 module.

Here is a video of the problem so far.


Any help will be appreciated.
 
Here is the Flight Controller your using I think.
https://hobbyking.com/en_us/micro-m...2-compatible-esc-s-x4-brushed-integrated.html

I could be wrong but why did you add a this "OrangeRX DSM2 module" that board all ready a DSM2 on it.

And something else you shouldn't be running your Quad like that with the prop's on because that one way to get hurt. That not safe to do. I know that much.

I'm not sure on anything else I could not much in the video.

This is my 0.02cent.
 
Thanks for the suggestions guys.

It seems that the drone performs the same when run off battery or over the USB, but obviously the USB also allows me to see the data in micro wii conf.

Yes, that is the control board I bought.

The OrangeRX DSM2 module was the module for the Turnigy 9X transmitter, becuase it otherwise wouldn't work with DSM2 control boards.
There's a chance I'm calling it the wrong thing.
This is what I'm talking about:
https://hobbyking.com/en_us/oranger...transmitter-module-jr-turnigy-compatible.html

Also, IT doesn't seem to remember the quad, I need to re bind it every time I turn on the quad/controller.
 
You must log in or register to reply here.
Back
Top