HELP PLEASE

R

roy

Member
Hello.I just got my quad together lastnight.I went out this morning and tried to fly it,But all the controls on my right stick are all backwards.I have the taranis plus.Can someone please help.
 
HI Roy go into the menu of the radio there will be a section on servos this is where you switch them they will be normal or reverse look for elev and aile , if they read normal change them to reverse this will fix the problem
 
Hi Roy your in mode 1 on the transmitter change the mode to mode 2 which 99% of us fly so your have throttle and rudder left stick , forward, back , right, left on the right stick this may fix the servo problem your having as the FCB may be set up for mode 2
 
Uh oh When I went to my slider page on the taranis when I moved my throttle the sliders were moveing correct.does that mean my motors are wrong.They spin the way they should.It just flies all backwards.Now I`m lost.
 
roy said:
Uh oh When I went to my slider page on the taranis when I moved my throttle the sliders were moveing correct.does that mean my motors are wrong.They spin the way they should.It just flies all backwards
Click to expand...
I don't know what flight controller you are using. In CC3D under TX setup they have a screen where you can check for correct movement of your sticks and if needed can be reversed right there.

CCC3_D_trans_check.png
 
Hello.I`m using the d4r2 flight controller.I also have the fr sky taranis plus.A guy told me today to get into mode 2 instead of mode 1.I have managed to do that.But now I cant arm the taranis.Before I would just hold left stick down and to the right,But now that I`m in mode 2 it doesn't work.Any ideas?
 
Hi Roy the transmitter needs to be in mode 2 which is throttle and rudder on the left stick and forward/backwards/left/right on the right stick ,once you have done that your need to wire up the FCB so the right channels go to the right inputs it will be wrong as your now in mode 2 , This may sort out the reversed servo inputs if not , your have to reverse the servos in the transmitter , then all should start to work ok
What you have is most FCB manuals are for a mode 2 transmitter if you wire up as the manual but use a mode 1 transmitter the FCB cant work right as channel inputs are wrong this is why you need a mode 2 transmitter to wire up the FCB as the manual
 
Back
Top