Help! F3 EVO brushed 2.0

charlieryden

New Member
Hi everybody! I'm new into quad and is setting up my first 380 :)
In parallel I ordered a qx80. The batteries arrived today and I was looking forward to test it!
I use cleanflight and everything seems to work out nicely when connected to the computer.
The receiver is binded and works as well.
When unplugged from the computer and with the battery plugged in nothing works :(
With the battery connected simultaneously with the usb everything works including the motors.
The board is set for 1S and I'm using 1S :)

I looked at some pictures of the board and it seems like my board is missing a part? I'm not very good at electronics so I don't know what it is. The board I got has outputs for 6 motors but the pictures from the site i ordered from has one with 4 outputs. Don't think this matters but I don't know.

Soooo, is it the missing part that does this or is it something else?EVOF3 2.0 pic 1EVOE.jpg
EVOF3 2.0 pic 3.jpg
 
Problem solved!
Found out that it was a choke coil that was missing. Found one I had in similar size on a USB-card. Soldered it to the board and everything works like a charm now :)
 
Back
Top