Ground Station build...

S

Steven Campbell

Well-Known Member
Putting together a case for a ground station, I have a basic reciever till a diversity reciever arrives, starting building it earlier this evening.

I will probably install an IMAX-B6 charger inside the case as well.

7" LCD, basic reciever for the moment, have a couple of 12v sockets in the case already plus a voltage meter.

I have two 5m antenna extension cables for the elevated antennas I will be putting up.

I have solar panels I can link up, two 18v 10w panels I can use to help power the case on the go.

The basic FPV goggles I have, have a video input.

Should be a fun build.1518417886078-287948733.jpg
 
So pardon my ignorance, I'm only familiar with people using goggles and a radio, but what is the purpose of the ground station @Steven Campbell ?

And same question for you @mozquito1 what does your selfie stick thing do that is different than the people I've seen with diversity straight on their googles?

I mean my first obvious guess is more range or power or something, but definitely interested in learning.
 
Spork said:
So pardon my ignorance, I'm only familiar with people using goggles and a radio, but what is the purpose of the ground station @Steven Campbell ?

And same question for you @mozquito1 what does your selfie stick thing do that is different than the people I've seen with diversity straight on their googles?

I mean my first obvious guess is more range or power or something, but definitely interested in learning.
Click to expand...

Typically, the higher up an antenna, the better signal your going to get open air with less interference from nearby objects.

With this ground station I'm building, I will be able to share/show real time what my flights are with others. No goggles needed, just watch the screen.

I will be integrating a battery charger as well so I can charge my drone batteries at the same time.

I will also be assembling another case specifically designating for mass charging.

I have 1 DC IMAX-B6 charger for the ground station and for the second case I will be building, I have 3 more IMAX-B6 DC chargers and if there is room, I'll install my IMAX-B6AC charger as well.

Will configure the charging case to run on AC or DC power with some 12v 4ah power supplies I have...

I already have a 100w portable solar panel I can rig up for overnight trips where I will be taking the drones too so my drones will eventually be solar powered. Built onto my car is 200w of solar power so I should have enough power to support heavy drone flying...
 
Gotcha, thanks Steven. Having learned that, then I can guess that Moz's selfie stick is mostly about getting additional height as you mention.
 
The duo is basically a better version of what's in the goggles, supposedly o_O just minus the screens.
Yes the stick is for height while I sit down not worrying about head placement. The battery just hooks onto the stick.
I since found a 4' tripod that closes down to 6inches I just need to find or make an attachment to attach the rod on top for the extra foot or two.
 
I love this idea. Thanks for sharing!

After I master GPS, this will be my next project.

Do you know of any sources I can start educating myself with?
 
BL Swagger said:
I love this idea. Thanks for sharing!

After I master GPS, this will be my next project.

Do you know of any sources I can start educating myself with?
Click to expand...
Sorry I'm a barebones acro flyer.
But I can point you to a veritable source of all things quad, PAINLESS360
On YouTube. If I need to know stuff, he is that Man.
 
mozquito1 said:
The duo is basically a better version of what's in the goggles, supposedly o_O just minus the screens.
Yes the stick is for height while I sit down not worrying about head placement. The battery just hooks onto the stick.
I since found a 4' tripod that closes down to 6inches I just need to find or make an attachment to attach the rod on top for the extra foot or two.
Click to expand...

Thanks, Moz, so you just run a wire for power and video feed from the box to your goggles, then?
 
2 points connected to a XT60 & a single video cable. If I could wear goggles I probably would get them, but I just got to make the best & I'm happy.
 
Functional, still waiting on other better components to arrive in the mail.

Got to install a ground bar and mount the various bits, each component has its own fused connection. Main power switch, have to wire in the voltage meter and 12v outlets still but I'm awaiting the ground block.

Will probably wire in a second battery on its own switch as a reserve.


20180212_200603.jpg
 
It would just fit on top of the quanum goggles, but my head yaws all over the place like stevie wonder.
Only his gob isn't catching flies.
 
mozquito1 said:
It would just fit on top of the quanum goggles, but my head yaws all over the place like stevie wonder.
Only his gob isn't catching flies.
Click to expand...

I'd start singing "Isn't he lovely", but with the mental image of your gob catching flies, I'll refrain. :cool:
 
I've just spent an hour looking for a pic or video of the Benny Hill scene with the drool bucket, but couldn't find one. Had a lot of laughs that reminded me of watching that show with my dad when I was a kid.
 
You must log in or register to reply here.
Back
Top