FPV Frustration...

Paul Wood

Paul Wood

New Member
I've got a non-functioning FPV system and can't seem to pin it down. It consists of...
  1. TS832 transmitter - worked previously
  2. TS5823 - not known working
  3. Eachine VR-007 - not known working
  4. Xiaomi Yi Camera - worked previously
  5. Sony FPV camera - not know working
I had the whole system working with an EasyCap adapter on my phone using EasyCap Viewer. Then it stopped working and because the light on the EasyCap was not lit I assumed it had expired.

So, I bought a VR-007 expecting that to just hook in to the transmitter signal and all to be well. But, that doesn't get a signal either. So, I bought a TS5823 to rule out a transmitter problem. Still no hook up with the VR-007.

I've no idea if the Sony FPV camera works so despite having tried it with both transmitters I can't tell if there's a problem with the Yi output.

All very frustrating. Ideally what I need is a known working system to test the VR-007 as working and then go through the other components to test for functionality. I live between Guildford, Farnham and Aldershot and wondered if there's anyone out there who would help me to diagnose the fault?
 
Make sure you're vtx and rx are on the same frequency. I mean there's not many parts involved in fpv. Also make sure your voltage is correct for your camera.
 
You must log in or register to reply here.
Back
Top