Force1 F100(Bugs 3 clone) Battery Upgrade Question

T

Tball5534

New Member
Hi everyone! I have a Bugs 3 basically but in the Force1 clone version. My question is, would swapping out the stock lip in with a 2s 2200mah 50c pack be alright? The stock pack is I think 2s 1800mah 25c. I'm still a lipo newb pretty much and was just wondering about the double C rate of the new battery. Thanks for all advice!
 
I have a MJX Bugs 3 with stock battery.
My questions regarding using a 2s 2200mah 50 c battery are as follow.......
Are the connectors compatible ?
Will the power connector be able to plug into the Bugs 3? (I don't think so.)
Will the charge connector fit into the Bugs 3 charger? (I have doubt on that.)

The screenshot below is connectors from a 2s 2200mah 50c battery :
battery connector.jpg


The screenshot below is from my mjx bugs 3 battery :
mjx battery connectors.jpg
 
Last edited:
The new battery has a t plug connector. I was going to swap out the t plug with the xt30 on the old battery, which is what my f100 takes. The balance charge plug is identical to the stock one.
 
You must log in or register to reply here.
Back
Top