First time using KISS GUI

Taylor

Taylor

Well-Known Member
Well, a little trouble in paradise... I am currently working on setting up the flight controller and have never used KISS GUI before. I have downloaded all of the correct drivers and even used ImpulseRC driver fixer which said it fixed the drivers, but when I try to connect in GUI the "connect" button changes to "connecting" and then stays there. The one aspect that I'm unsure of is the baud rate for a KISS v1 FC. In my device manager, I believe it shows 9600 (I'll have to double check), but I'm not sure if that needs to be changed. Also, I have already flashed the latest firmware via DFuse and I have the solid green light along with a blue light flashing every second or so, which from what I've read means that the FC needs to be activated and from my understanding can't be done until I am successfully connected to GUI. Any ideas?
 
Also, I've tried downloading the GUI via Chrome apps (assuming that it's the latest version) as well as 2.0.2, and 1.16.15, all with no luck.
 
Anybody? I could really use some help! I've been messing with it on and off still with no luck. I may email Flyduino here soon to see if they have any suggestions.
 
Back
Top