First quadcopter wiring

[simpleniko]

Hey guys
First of all,forgive me if this is the wrong forum.

Me and a friend are building a quadcopter for our school project, and we have a bit of a prblem, we have no idea how to wire it up.

the frame is all set, the motor are connect to the ESC and the ESC are soldered to the frame.
we are using the crius all in one pro v2 and flysky fs-R6B with flysky FS-T6.
could someone guide us how to wire it up?
thanks alot

 

[holtneil]

Hi i need more info before i can help is it the wiring from receiver to board ? what is it on ? if its a quad are you fly + or x mode , the transmitter need to be set as an aero, as the boards do all the work
have you soldered the motors to the ESCs as you may need to swap 2 wire to get motors to turn the right way
I take it that the frame has a power board and you have soldered the ESC to it ?
How are you powering FCB?

UPDATE i found this for you it may help wire up
https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=6&cad=rja&uact=8&ved=0CEMQFjAF&url=http://www.unmannedtech.co.uk/manualsguides/all-in-one-pro-board-setup-with-megapirates-code&ei=hOOFVJn8KcGWavyNgPAO&usg=AFQjCNGukPlTW7h87CUmSIhrbzklR4fnEA&sig2=6KfKnvY4I-0Du1KS9ItWcw&bvm=bv.80642063,d.d2s
And this is good to
https://www.google.co.uk/url?sa=t&r...=IOOU33MeyyTQFhfFEoPyQg&bvm=bv.80642063,d.d2s