First proper flight with gimbal, advice please if possible

hipplew

hipplew

Member
Hi all well this is my first flight with a cheap eBay gimbal im pretty pleased with the results so far as the camera is only a clone of a sj4000 as well but my problem comes about 30 seconds in when I tilt the quad to the left it kicks the camera, now I now this will have something to do with the settings but not to sure how to set it up better. Its on a F450 with Emax 2213 10x4.5 props, Naza lite (upgraded firmware) and 2200mah and the gimbal was £28 and had a BGC 3.1 board
Role PID settings are P 7 I 0.15 D 12
Pitch are P 7 I 0.1 D7

Role power is 110 and pitch is 80


any thoughts are more than welcome

Howard
 
Hi mate the gimbal fcb is looking for a signal from the transmitter as you have the naza lite run 2 leads from the gimbal out on the FCB to the gimbal also turn on gimbal mode in the Naza assist
I must say your wife is not impressed dont worry thats normal for a wife lol
 
Thanks for the reply I have put one lead to the naze and to the pitch (to control) it. but you say to put one to the roll as well?? as for the wife hmmm I know it just cost me when she decides to go out spending I try and keep things cheep well she just does the opposite
 
Hi mate just try on the one lead I only have the pitch lead on mine and it did do what yours did till I fitted this lead
 
Back
Top