First Drone
- Thread starter oguzhan
- Start date
Take a look at some RTF like Eachine, then try building a part list if you don't like that.
Here is a basic parts list that will get you started if you want to actually build it! This includes extra props and 1 extra esc. I didn't add a flight controller or rx because those are more personal preference and I've never built one just for racing so I don't know what flight controller would best suit you!
I really liked the eachine racer250fpv. I want that kind of drone but i want to build it my self for some reasons. But i want some tested combinations because i am not capable of chosing the right combinations. Can you suggest me something and if it is posibble i want to add barometter. Thankyou and sorry if my english broken.
Well if you are building a fun little speed demon then I suggest:
the Robocat frame (looks cool, but it is heavy) I am just suggesting this because I think you'll like the look
some 2300kv motors. multistar elite for slower 3S flying or Cobra for speed, might also try those new emax red bottoms
a 1200mAh-2000mAh battery 3S or 4S depending on the motors and ESCs you choose
12amp - 18amp ESCs depending on your motors, if you get motors with 3S-4S support make sure to get ESCs as such
A flight controller of your choice
a 6 channel radio
the Robocat frame (looks cool, but it is heavy) I am just suggesting this because I think you'll like the look
some 2300kv motors. multistar elite for slower 3S flying or Cobra for speed, might also try those new emax red bottoms
a 1200mAh-2000mAh battery 3S or 4S depending on the motors and ESCs you choose
12amp - 18amp ESCs depending on your motors, if you get motors with 3S-4S support make sure to get ESCs as such
A flight controller of your choice
a 6 channel radio
W
what do you think about this?
Attachments
A lot of people would suggest that you get all counter clockwise (right hand thread) motors and just buy some lock nuts.
The motors are a little cheaper than I'd want to use, as they are 1804, but if that is all you have budget for right now then they should be fine, just a little underpowered. 5'' props should be fine, 6'' might be pushing it on motors that small.
The motors are a little cheaper than I'd want to use, as they are 1804, but if that is all you have budget for right now then they should be fine, just a little underpowered. 5'' props should be fine, 6'' might be pushing it on motors that small.
Firstli really thank you for support.
What about this one?
