First DIY quadcopter

  • Thread starter Thread starter tombost
  • Start date Start date
Battery
Load: 23.29 C
Voltage: 9.63 V
Rated Voltage: 11.10 V
Capacity: 5000 mAh
Energy: 55.5 Wh
Flight Time: 2.6 min
Mixed Flight Time: 6.9 min
Hover Flight Time: 9.3 min
Weight: 405 g
14.3 oz
Motor @ Optimum Efficiency
Current: 28.90 A
Voltage: 9.41 V
Revolutions*: 10221 rpm
electric Power: 272.0 W
mech. Power: 217.4 W
Efficiency: 79.9 %
Motor @ Maximum
Current: 29.12 A
Voltage: 9.40 V
Revolutions*: 10197 rpm
electric Power: 273.7 W
mech. Power: 218.8 W
Efficiency: 79.9 %
est. Temperature: 53 °C
127 °F
Motor @ Hover
Current: 6.86 A
Voltage: 10.70 V
Throttle (linear): 38 %
electric Power: 73.4 W
mech. Power: 34.1 W
Efficiency: 46.4 %
est. Temperature: 45 °C
113 °F
specific Thrust: 4.28 g/W
0.15 oz/W
Total Drive
Drive Weight: 1070 g
37.7 oz
Current @ Hover: 27.46 A
P(in) @ Hover: 304.8 W
P(out) @ Hover: 136.3 W
Efficiency @ Hover: 44.7 %
Current @ max: 116.47 A
P(in) @ max: 1292.8 W
P(out) @ max: 875.0 W
Efficiency @ max: 67.7 %
Multicopter
All-up Weight: 1258 g
44.4 oz
add. Payload: 1985 g
70 oz
max Tilt: 67 °
max. Speed: 67 km/h
41.6 mph
with Rotor fail:
EFuncontrolable.png
 
i can't find 35Amp ESC..
I understand what C means so the multistar 5200mah * 20C can give 104A, ok but my motor specs is : Max current: 30A, so 30 * 4 = 120A is that right ?
 
Hi mate your be good with a 20c battery , as for the props the 0.2 deg pitch between the 10x4.5 and 10x4.7 will give you loads more lift trust be I have flown on both props and the 10x4.7 really make the quad jump with the extra lift
 
Hello Tombost, AS a biginner, you have to buy some small fpv for practicing then diy quadcopter by yourself. Components of quadcopter is complex and what motors \ ESC \ propellers and battery combination will work with each other you have to know. Before you start buying parts you should have rough idea, for what purpose you want to make your quadcopter?



om
 
Back
Top