First Build

J

Jkurri

New Member
Hi folks,

I, like many of you am looking for some verification before I go ahead with my set up and begin ordering parts, any feedback would be greatly appreciated.

TMotor MS2216 900Kv
Afro ESC 20 A
2800mAh 3S 30C LiPo Battery
OpenPilot CC3D flight controller
10 x 4.5 props
Turnigy 9X transmitter

I'm not sure if there is anything I am missing?

I think the ESC's are okay as they have a linear BEC and are rated for 20A while my motors have a max current of 18A but I just wanted to confirm. Also, I'm not sure about the battery.

Thank you, I hope to be able to contribute in the future.
J
 
Frame, (unless you are going do DIY),
Power distribution cable/board
I suggest getting 25-30 amp ESCs, as a tip I'd suggest getting everything from Hobbyking in one order, as shipping will kill you. I paid over $100 in shipping doing it in burst and buying from more than one seller.
Also you may need a LiPo charger and I suggest getting batteries with XT-60, as it is more common, and Deans are slowly fading away.
 
You must log in or register to reply here.
Back
Top