First build in the UK without waiting weeks for shipping

T

trif

Member
I've put together the following mostly from eBay and some other uk suppliers, I've watched many videos but am brand new to all this so would really appreciate some experienced eyes to spot any incompatibilities in my build or any dodgy eBay fakes:

Transmitter
https://hobbyking.com/en_us/fpv-racer-radio-mode-2-white.html?___store=en_us

Frame
http://www.ebay.co.uk/itm/381822755034

Motors
http://www.ebay.co.uk/itm/152505254112
ESCs
https://www.unmannedtechshop.co.uk/chaos-blheli_s-dshot-esc/
FC
http://www.ebay.co.uk/itm/182480141185
Props
http://www.ebay.co.uk/itm/162442546360

VTX
http://www.ebay.co.uk/itm/382014224197
Camera
http://www.ebay.co.uk/itm/152498703609
FPV goggles
http://www.ebay.co.uk/112349312271
Video Receiver
http://www.ebay.co.uk/itm/382015049147

Battery 1
https://hobbyking.com/en_us/turnigy-nano-tech-1800mah-4s-65-130c-lipo-pack.html
battery alternative
https://hobbyking.com/en_us/multist...h-4s-65c-multi-rotor-lipo-pack-gold-spec.html
(Already got some old 3S Zippy Lipos for FPV Goggles and RX etc)

Thank you,
 
Thank you Jackson, luckily I'm coming from the gaming side so thumbsticks and the overall shape look perfect :)
 
how's it coming along?

you may also need:
soldering iron
solder
solder wick
heat shrink/electrical tape
double sided tape
zip ties
 
I've done a small amount of hobby electronics etc in the past so have all the tools, only real problem I had was a 5.5mm spanner for the M3 nuts, also FPV camera mounting was a pain because I didn't get an HS117x style camera that'd fit my frame,

Key components went together a treat and I was flying within a day of my motors arriving! Dshot600 meant for no calibration!

Most recent post on reddit with video and pic

https://www.reddit.com/r/Multicopte..._flying_around_trees_hows_my_flying_also_vtx/

Look for posts on my profile and there are a few others of the iterations
 
Last edited:
You must log in or register to reply here.
Back
Top