Dsmx

Scooterya28

New Member
I have spectrum 4648 with eachine naze 32 and spectrum radio. I have got everthing to work on cleanflight but my right stick does nothing and let one only does minimimal throttle and pitch and that should be yaw. Any ideas?
 
Hi mate you dont need pitch thats for CP helis you should not have channel 1 and 6 mixing , make sure the radio is set on aero with no mixing , the 4648 is a sat receiver so set up should be easy this is what make me think the transmitter set up is wrong
 
I have spectrum 4648 with eachine naze 32 and spectrum radio. I have got everthing to work on cleanflight but my right stick does nothing and let one only does minimimal throttle and pitch and that should be yaw. Any ideas?

I'd Check all of the settings reguarding the sticks and reciever?

Some things I'd check
Stick settings in radio expo, limits, scaling, and exc.
stick settings like expo in cleanflight
reciever type in cleanflight
is the reciever bound properly with the propper protocol to the radio?

have you used this radio or reciever for anything else?
 
I'd Check all of the settings reguarding the sticks and reciever?

Some things I'd check
Stick settings in radio expo, limits, scaling, and exc.
stick settings like expo in cleanflight
reciever type in cleanflight
is the reciever bound properly with the propper protocol to the radio?

have you used this radio or reciever for anything else?
Yes i have used for another quad
 
Can you try to view how that reciever is percieved in the other quad's inputs and to see if it is in the radio or reciever? It could be in just the FCB, which would likely be as simple as changing the settings or even importing from the other quad as a latter resort.
 
Can you try to view how that reciever is percieved in the other quad's inputs and to see if it is in the radio or reciever? It could be in just the FCB, which would likely be as simple as changing the settings or even importing from the other quad as a latter resort.
The other quads board is shot. I have 2 more naze 32 boards but i am having trouble flashing them. I will try on my weekend to figure everything out. Sure wish all this stuff had directions, rather than sucking everyone else into your own problems. Thanks for the ideas
 
Dont sweat it ask away! If they had a book of directions, it'd be obsolete by the time it got published. Everything I would of said has already been said above. Good luck!
 
Back
Top