CX-20 Transmitter With Other Quads

[Layton]

Hello,
I have a brand new transmitter from a Cheerson CX-20
I dont have the quad though, i was wondering if there was any possible way i could use this transmitter on a self built quad.
Would have have to purchase this
http://www.gearbest.com/rc-quadcopt...Ukm7hKV3KXvthcZUyyxKIF0WojIonDynvUaApfj8P8HAQ
Then plug it into the flight controller and set it up through mission planner?
Thank You

 

[Jackson]

Seems possible. Hopefuly there are some markings on the back to establish at least basic pin order. AETR or TAER.

Then use this to figure out the rest.

I imagine SWA (3 way?) would be next after 'R'.

 

[Layton]

Seems possible. Hopefuly there are some markings on the back to establish at least basic pin order. AETR or TAER.

Then use this to figure out the rest.

I imagine SWA (3 way?) would be next after 'R'.

I found this picture


Then could i use this info i also found

Throttle/Collective Pitch == up/down
Rudder == yaw, rotate left/right
Elevator == (bank)/fly forward/backward
Aileron == (bank)/fly sideways left/right

 

[Jackson]

Well that helps.

The one you linked to may have the channel pins flipped.

But you'll be able to figure it out.