Custom Drone build - The motors

J

Josh22

Member
Hi, I hope someone can help me. I've been planning on building my own drone for a while. I've designed and constructed the framework using 3D printing and aluminium tubing.

The main issue is, I don't know which motors and blades to use. The length of each arm is 250mm and the total body weight (excluding electronics) is 473g. Which motors and blades would you suggest I use? I can then design the electronics and power system around these.

(I've attached a photo for reference)
IMG_0926.jpg



I appreciate your time to take a look at my project and thank you in advance for your help.
- Josh
 
Thank you for your help! I really appreciate it.

I'm glad you like the design, if I'm honest I haven't really thought about a budget I just want to get the thing flying haha
Those motors on amazon look very well priced compared to others I've seen, I like the look of them.

Is there a way to calculate how well the motors will be able to lift the drone (if at all)? Or is there a rule of thumb in terms of motor rating compared to how much they can lift individually and is this just simply multiplied by 4 for a quadcopter?

I've seen lots of different types of motors around all with different ratings but I'm not certain how to calculate how well they will be able to lift the weight of the drone.
 
Well, the general rule of thumb is you want twice the amount of thrust minimum for the weight of the quad at full throttle. So if your craft weighs 1000 grams, you want at least 500 g thrust per motor. Actually I take this a little further and use this principle but at 75% throttle (just because I like to have xtra power on tap).
When I started in this hobby (just a few months ago) I made the mistake of just buying stuff and hoped it worked. As a result, I've got a crapload of stuff that I have no use for and an empty bank account. Now I use an app called ecalc. Awesome in that you can put in the specs of your build and try any combination of motors, props, ESCs, etc. and it will give you the results. Here's the link
http://www.ecalc.ch/
 
Josh22 said:
Is there a way to calculate how well the motors w
2ill be able to lift the drone (if at all)? Or is there a rule of thumb in terms of motor rating compared to how much they can lift individually and is this just simply multiplied by 4 for a quadcopter?
Click to expand...
I use those motors and they work well, just oil the bearings occasionally. A test result.

Figure them at 700 (the test shows more) X 4 = 2800 grams of thrust. Dividing by 2.5 as a goal, gives you an all up weight of 1120 grams to shoot for for good performance. You can be a little heavier for less sporty flying.

maxresdefault.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top