Connecting Walkera Gimbal to Phantom 1 Battery

[iKokomo]

I just got a Walkera G-2D gimbal and a GoPro Hero 3 White for my DJI Phantom FC40. This is to replace the CNC Gimbal that did not work.

When I opened the Gimbal package I noticed that the power cable end to Gimbal is different from the CNC one. The CNC Gimbal’s power end connected to the secondary plug on the battery (not the XT60 the flat 4 pin connector that plugs into the side of the DJI charger).

The Walkera has a different power connector that does not work with the battery connector.

Where can I get an adapter so I can turn the Walkera power adapter into that connector on the DJI battery so I can use it?


Thanks a lot!

 

[GJH105775]

Can you provide a model number or pictures of the ends?

 

[iKokomo]

This is the Walkera Power Cable: http://www.ebay.com/itm/Walkera-Gim...232?pt=LH_DefaultDomain_0&hash=item2ed7661968

and this is the battery: http://www.ebay.com/itm/2pcs-Genuin...866?pt=LH_DefaultDomain_0&hash=item2c8075ec42

Note: I would like to use that smaller cable to connect the gimbal.

 

[holtneil]

Hi mate it plugs into the balance lead of the lipo, if it was me I would make a loom to connect to the battery plug just solder the loom into the quad side of the battery lead