Binding Hubsan Skyhawks TX to different RX?

Hi you can only bind hubsan to hubsan , if you build a quad then buy a good 6 channel transmitter and receiver
 
Hi mate, you can use the board and transmitter ,but the motors on the small quads are normally coreless, and your need brushless, there is no way i know that you can use an esc on these boards
There is nothing stopping you from stripping a crashed one and make a simple frame and mount everything from the crashed quad to it
 
If you have the Hubsan FPV transmitter see if you can buy just the quad as a bnf , try asking banggood they may be able to let you have just the quad, its ment to be really good fun to fly
 
Hi I am sure that radio was the one that came with the hubsan lynx heli FPV , then the quad come out as a updated X4 , it was the x4 then x4 with leds, then x4FPV , it does work on all the hubsan FPV system heli or quad , the receiver is built in the board with the FPV tx , so you could use the parts from the x4 quad with FPV , on a home made frame , but will have to be kept light weight as the hubsan motors are coreless , and have limited power , so there are not many ways to go , bind and fly i think is best with that transmitter also this works on fat shark goggles
http://www.google.co.uk/aclk?sa=l&a...n-fly-version-h107dn?language=en&currency=GBP
 
Back
Top