Anybody built one of these?
- Thread starter Quinton
- Start date
Quinton
Member
Sorry that number didn't work. This is the description on eBay
Custom Carbon Folding Quad Copter Drone W/ Motors And 3 Axis Gimbal ARF
This drone was constructed from Carbon and Aluminum. It features an integrated 3 Axis Go Pro Gimbal (fully remote control) utilizing Base Cam Electronics for easy software programming on the front of the Unit. The versatile 1/2" Red square tube arms, fold in and lock down by the hand tightening knobs on the underneath side. These knobs compress the carbon plates of the drone to lock the arms in place!
It features 4 Generic T-Motor Type Motors with Prop Adaptors and 15" of Wire.
The Drone Measures 21" Front to Back, 8-1/2" Wide when folded, 18" Wide when open, 3-1/2" Tall to the top plate, 5-1/2" Tall to the top of the gimbal.
The Drone weighs 2 lbs 9oz with 4 Motors and the Gimbal.
RECOMMENDED:
35-40 Amp ESC's
4 Cell (14.8V) 5000-8000mah Battery
Custom Carbon Folding Quad Copter Drone W/ Motors And 3 Axis Gimbal ARF
This drone was constructed from Carbon and Aluminum. It features an integrated 3 Axis Go Pro Gimbal (fully remote control) utilizing Base Cam Electronics for easy software programming on the front of the Unit. The versatile 1/2" Red square tube arms, fold in and lock down by the hand tightening knobs on the underneath side. These knobs compress the carbon plates of the drone to lock the arms in place!
It features 4 Generic T-Motor Type Motors with Prop Adaptors and 15" of Wire.
The Drone Measures 21" Front to Back, 8-1/2" Wide when folded, 18" Wide when open, 3-1/2" Tall to the top plate, 5-1/2" Tall to the top of the gimbal.
The Drone weighs 2 lbs 9oz with 4 Motors and the Gimbal.
RECOMMENDED:
35-40 Amp ESC's
4 Cell (14.8V) 5000-8000mah Battery
Jackson
USA member at large
Yea, you should first introduce yourself and get your 3 posts there.