Aerobatics anyone?

L

Littlegrizzlybiggins

Member
Ive built a 450 quad using the KK2.1 HC board.
I originally built it for aerial videos/photos. But i've since built another 550 quad with apm2.6 + gps for the same reason so my 450 is now a toy to abuse.

Id like to do flips\rolls and anything else they are capable of doing. if anyones got any advice on how to program the kk2.1 so i can do flips id appreciate any tips.


id also like to do an inside loop with it too. itd need a lot of speed and probably a few spares at the ready. any tips on this?


Cheers, me
 
Hi mate yes flash it with Steveis code v1.18s1 pro and then turn up stick scaling it will flip very easy also go into setting and turn on spin at arm, what this will do is stop the motors from stalling when flipping due to the throttle being closed at the point of the quad going upside down
PS if you cant flash it you can still do the other parts that i said but Steveis code is more stable than HK code
 
Hi mate just down load multirotor tool and then look under kk2.1.5 firmware flash and Steveis1.18s1 pro will come up , its really nice firmware it will give you more menus too so if you make a strange shape frame you can off set the board etc there is a manual for the flash if i can find it i will link it for you as well as the kk tools . The manual is for v1.16s pro but the set up is the same , if you need any more help just shout
https://www.google.co.uk/url?sa=t&r...=xN86HBtCQFvlQdz7zH1TUQ&bvm=bv.80185997,d.cWc
https://www.google.co.uk/url?sa=t&r...69y3WxRSHLUpaKY4Q&sig2=DCVtKBo2BEdgm3VgCyumbA
 
Thanks for the links also, I too was wondering where to get firm ware for a build I am doing to make the quad do loops and flips.
 
Hi mate its normally done by stick scaling the higher you go the faster it flips, till you can fly it without it flipping on take off
 
Hey guys, I'm new here, I just got a quadcopter, the Cheerson CX-30C wih Camera and I can't figure out how to take a picture with it. Can anyone help me out? That would be great thanks
 
Back
Top