ActionDroneOne [AD1] Maiden flight video

ActionDrone

ActionDrone

Active Member


Specification:
Airframe + Full Gimbal System(motor x2 + control board + IMU)
We have 3 different version with different materials & different price.
  1. Full Carbon Fiber.version = 508g (3K matte surface)
  2. Carbon Fiber Reinforced version = 538g (3K matte surface)
  3. Fiberglass version = 610g (pure black surface)
  • Airframe made out of 1.5mm board.
  • 16mm round tubes x4
  • 16mm round tube clamps & motor mounts,
  • 2 axis brushless gimbal in the front designed for Gopro 3 only. (come with 2 brushless motors, control board & IMU installed)
  • Gimbal motor GM2208-80 x2,
  • Top transparency protection cover made out of 1mm bullet proof material,
  • Front Lens cover made out of 1mm bulet proof material,
  • Motor to motor 590mm (CG still in the x center, same as standard quadcopter),
  • Total Flying weight about 1830g (included GoPro, GPS & 4S 5000mah)
Frame Opened: length: 435mm，wide: 530mm，height: 105mm
After Folded (without props): length: 510mm，wide: 185mm，height: 105mm
After Folded (with props): 590mm，wide:185mm，height:105mm
 

Attachments

  • 1268440_438386292945224_389423791_o.jpg
    1268440_438386292945224_389423791_o.jpg
    174.3 KB · Views: 3
Thank you! I took it to Peru with me and it was easy to carry since the wings fold. Just have to loosen the screws a bit then tighten them when you're ready to fly! The only problem is that TSA could not figure out what it was so they always had to open my bag. They didn't question the fact that i was carrying four 5000 mah batteries. I think they were more curious than doing their job but it was ok I had no problems going through. I could not fly it at Machu Picchu because they did not know what the policies are for these things yet so to be safe they didn't let me go in with it. It was windy anyways.

I'm glad you like it.
 
Back
Top