3d printable 2.4ghz helical antenna

I made an attempt today. 25mw. Didn't get very far. Only about 700 ft before breakup. Although it did give me a good test of GPS rescue. It's working.. Thank goodness lol. So I switched to a skew planar antenna to see if that would garner more range but it was actually less. So I think I have an issue with the antenna on the craft. Also I was flying low. Once I hit gps rescue and I shot up to 100 feet, the video popped wright back in. So Height helped.

I got about 500 feet away with the planar antenna. So like 200 feet less. This tells me the helical is working. I am going to get a new antenna for the craft and then re-test. I should be able to get at least 1-2 miles on 25mw.
 
Well... Sometimes we do the stupidest things... Like putting an RP-SMA female on an SMA Female.. Sure it screws on but how well that works... So yeah that was stupid... BUT.. Basically I made it 700 feet away with that and the helical antenna at 25mw... I suppose that may be good! Anyway, I have a new antenna for the quad coming. I have the FuriousFPV pagoda style one coming. The clover leaf kind is too vulnerable. I had one on this and it just gets mangles. Not even from crashing. I had the quad on my pack and I must have brushed against something and it's squashed...
 
Back
Top