esc

Hey there. - thanks 4 stopping here. I´ve just finished a build. Everything worked fine - then I wrecked it. I had to invert the motor direction and instead of resoldering two cables, i just went for BLHeli32Suite. I have this Esc: https://store.tmotor.com/goods.php?id=821 I followed EXACTLY...

Hello Everyone I have a 3D printed Quad copter that I just finished building. First flight was not a good one. It started to go up then it just flipped. the Flight controller is iFlight SucceX-E Mini F7 V1.0 MPU6000. The ESC's are Crazepony Flycolor BLHeli S 30A. The ESC's is a replacement from...

I’m using Pixhawk cube, matek, and navio2 power module with sunnysky bldc motor, new xxd 30a esc. I use r12ds and at10 ii as RC system. 4s 1800mah lipo battery. I did everything as shown as manual. When I plug in my battery to the system. 2 led of matek is blinking red and motor beeping...

Hi very new to fpv so need a little help Basically, let a mate fly my drone (rookie mistake) he lost control, I lost sight of it and he crashed it straight into a puddle and was in there, fully submerged, for about 10 mins before we found it. I’ve seen forums online saying it should be fine if...

Ok so I have a Mamba F405 mk2 20x20 with a max burst of 30Amps with 4S batteries and I have 6 inch props. I also want to get the Emax ECO 2207 or the 2306 motors. Now I'm not understanding the KV and what I should go with. I've had people tell me go with 2400KV then some say 1700KV and nobody...

This is my first build and I used this tutorial by dronemesh and by accident ordered the F405 MK2 stack instead of his FC. Now I have 2 ESC’s but the F60 Pro arrived without a heatsink and due to Coronavirus diatone can’t replace it, should I still use the F60 Pro or should I return it? Also...

Hello everyone! I recently built a F450 with the following specifications: 1. A2212 - 1000KV BLDC Brushless Motor. 2. Mystery Cloud 30A BLDC ESC - Brushless Motor Speed Controller. 3. Naze32 REV6 flight controller with dRonin. 4. 3300mah 3s LiPo battery I used dRonin because its easy to...

Thanks for reading! I'm at a bit of a loss with this one. So I built a 6 S quad and whenever I go above about 20% throttle the motors shut off and quad is unresponsive to the transmitter. I thought it was the flight controller at first because the blackbox would end when it shut down. But I...

so i accidentally plugged in the battery to my emax Tinyhawk while the motors were unplugged, and now it does no beeps or boops or led flashing, it connects to betaflight but the motors wont spin when i increase the throttle in the motor tab, did i just screw up my drone? :(

Hello, I'm looking for a 4in1 ESC 6S compatible, my motors at 100% throttle draw a maximum of 28A so I need at least 30A total, 40A would be better. I also need a 5V BEC for powering my Matek F405-OSD flight controller. what about these 2, I don't know these brands, are they reliable...

Hey guys I'm new to the forum after bugging the crap out of people on IG I thought I'd try on here. Drone I own is a eachine wizard xt220. PROBLEM I have been cooking esc's like eggs in the morning... I use a 4s 1500 35c battery and my esc's are just some generic crap that came in the BNF...

Hi there, I know it's not strictly quadcopter related, but I built an electric scooter and used a HobbyWing 80A UBEC ESC as the speed controller. I worked wonderfully and didn't even get hot until one day I decided to try out the brake feature on it. They are extremely powerful and stopped my...

Hi all! I'm new here on the forum so this is my first post. I'm building my first FPV drone at the moment. Even thou I have watched many build videos, I still have a lot of beginner questions I don't dare to ask elsewhere. I hope this newbie forum section can help me. :) Ok... I have 3...

Hello. I am really confused here. I have no trouble setting up and connecting the radio to the receiver that it shows it is connected on my radio’s screen. And also the flight controller looks normal; it has one blue and one red light when connected to the battery. However, after I installed...

Hey, I’m working on a 5in miniquad and have just run into an issue. I just moved to Mystery 30a escs and I am having trouble with using them with Cleanflight. As far as I know from my searching, is that I need to select the PWM option on the motor protocol option, and I’ve been recalibrating...

Hi all, first time poster here. I am beginning mechatronics studies, but have never built a quadcopter before, so I am new to all of this. I am attempting to make a quadcopter from scratch, using an Arduino Uno as the brain. I am wondering what the "best" IMU and motor controllers would be for...

So was just about to fly a build when I had the great idea to test out the motors (with no props) on the bench to see that everything was working before I took it to the park. I may have gotten a little too throttle happy because the front left motor started to smoke, then caught on fire... then...

Hi, I have a small 250 quad with Afro 12A bec ESC flashed with BLHeli. I have a KK2.1.5 FC flashed with Steveis 1.19S1 Pro. Whenever I try to take off the quad never leaves the ground and at some point of throttle the board shuts off like it browns out or something. Would anyone have any ideas...

Someone was asking in a post about esc's but didn't have a proper picture to scale of them. So here is one of the pocket rocket. For £6.70 I been flying these on 3 kwads for 10 months with no problems. And on 4S aswell. I have built other kwads with these on & fix them for ppl & these are...

Tattu has released a new Power Pack Bundle, include Tattu quadcopter motors, ESCs and Lipo batteries. The motors and ESCs are the new products by Gens Tattu, with the best FPV drone lipo batteries, you will get a very good DIY drone. What are they include? 1.Tattu 2305 2450 Brushless Quadcopter...